Sump Pump Repair in Noble Square, Chicago: What Is It and How to Fix It?
When water starts to creep up your basement floor, you may be wondering what went wrong and how to fix it.
You may not know what a sump pump is, or how it even works. This article will explain all about sump pumps and why you should get one repaired or replaced after a flood.
If your sump pump fails in the middle of a flood or storm, it can lead to major problems like mold growth and structural damage if not addressed quickly enough.
Our expert plumbers helped a family in Noble Square, Chicago clear their flooded basement, and protect against future flooding.
What is a Sump Pump and Why do you need it?
A sump pump is a device installed in the bottom of sump pits to help remove excess water from your basement or ground level.
The sump pit collects rainwater and groundwater that seep into the foundation of your home during heavy rain or snowmelt events.
This excess flooding can cause serious damage to both walls and furniture inside your home. Such as sagging floors, buckled drywall, waterlogged items, and warped wood siding. Pumps can help you avoid such trouble in your home.
Sump pumps usually use electric power and are situated in the lowest area of your basement.
When water levels rise, it is forced up into a drain pipe that leads to an outside source (such as storm sewers or nearby bodies of water).
Note! Be sure not to set the drainage point in an area that will return it back into your home–ideally, keep this distance at 10-20 feet from the foundation of your house. Some cities have building codes that determine where you are allowed to direct it so check with your local Noble Square Chicago government officials just in case!
Sump pumps can help reduce damage from excessive moisture by pumping out enough floodwater to keep the sump pit dry. This prevents any mold from growing within your Noble Square home.
They are important because they help protect your home from water damage, which can cost a lot to repair.
How Sump Pumps Works
Sump pumps are an important part of a home’s foundation to protect it from flooding.
A sump basin is a pit in the basement floor, usually located below where most water accumulates and holds the pump itself.
The pump’s switch sense when levels or pressures increase and then automatically push excess water out through either their discharge line (a pipe connecting them to designated drainage areas).
There are different types of sump pump systems such as:
Submersible Pumps
Submersible pumps are when the pump is underwater. It is submerged in a sump basin.
The pump usually has an electric motor or hydraulic power unit that turns the impeller inside of it, which pulls water into the pump and forces it through to a pipe outside of your home.
Pedestal Pumps
Pedestal pumps are upright and separate from the sump basin.
A pedestal pump is installed above the ground on a platform called a “pedestal” with hose inlets near the bottom of this pedestal for easy attachment to exterior drains.
Battery Operated Pumps
A battery backup pump is a great way to provide some extra security from flood damage.
When the power goes out during a storm, this battery system allows your pump to continue operating when you need it most.
As the water rises, it triggers the float switch which turns on the battery to begin to pump the water out of your basement.
Water Powered Pumps
A water-powered pump is a device that clears the water in your basin through increased water pressure.
The advantage of having this type of system installed is there’s no need to monitor the backup or replace any type of battery, making it more convenient for some homeowners.
It does come with disadvantages though as additional costs can be added to your utility bill.
Backup Pump
Depending on your household needs and flooding risk, some clients choose to install two pumps to act as a backup resource.
Common Causes of Sump Pumps Failure
Sump pumps can fail for a wide range of reasons such as the system’s age, power requirements, and surroundings. Additionally, pumps can also break due to external factors such as:
How to tell if your sump pump is in need of repair
While a flooded basement is a good indicator of a problem, some other signs to look out for include:
-a pump with an unusually high amperage usage since it is constantly running
-the pump fails to turn on when it is supposed to
-sudden noises coming from your sump pumps or basement that you have not heard before. This indicates that the motor is running but the system is not working properly and will fail soon. If you hear a banging noise, the sump pump impeller could be jammed and will need to be replaced
How our Professional Plumbers can repair your Sump Pump in the Noble Square neighborhood in Chicago
During a job in the beautiful Noble Square Chicago, our plumbers arrived at the flooded property.
The family had anxiously laid down towels to mop up the contaminated water leaking from their waste system.
Our experts performed a diagnostic of the basement plumbing system.
They discovered that there was not enough water pressure for the sump pump to function properly and drain all of the standing water around it.
Without the pump, water was pooling throughout the family’s basement, damaging their floors, furniture, and walls.
We installed a new and improved sump pump and prevent the same issue from occurring in the future.
Our experts chose the submersible model which is easier for our clients to use because it’s more automated and requires less effort from the user.
Our plumbers always carry around brand new replacement sump pumps and parts on their trucks so that they can handle any emergency situations like these as soon as possible!
Tips for Preventing Future Problems with Your Home’s Sump Pump System
Sump pumps have become a necessary part of many homes. They are designed to protect your home from flooding, which can be an expensive problem if it occurs.
However, sump pump systems need to be maintained and cared for properly or they will break down and require replacement far before their time.
These tips can help preserve your sump pump system for years to come:
Sump Pump Rescue in Noble Square Chicago
No matter the type of pump, it is a crucial part of protecting your home from floods.
Sump pumps are an important consideration in any basement remodeling or new construction project. They can be installed either above ground or below the level of your house.
To avoid costly damages, homeowners must prepare their houses for increased precipitation and snowfall by protecting against water damage.
There are many types of sump pump systems that you may need to consider when installing a new system for flooding protection. Our Rescue Plumbing team will help guide you through it all!
If you notice flooding or pooling water near your pump, call us right away at (773) 799-8848. We can assess the situation and make sure everything is working as it should!
